Disposable Medical Protective Clothing
Due to the impact of corona virus and our large order quantity, please contact us via whatsapp to confirm stock and price in real time!
The structure of the isolation layer of disposable medical protective clothing should be reasonable, easy to put on and take off, and the joint position should be firm. The breaking strength of the material at the key position should not be less than 45N; the elongation at break of the material at the key position should be not less than 15%.
Product Fabric: non-sterile
Medical grade antibacterial: Breathable material coated
Fabric PP +PE: weight 63kg
Seamless hot melt adhesive strip: Better seal, better protection
1. Through the barrier spray test
2. Through the barrier particulate test
3. Through the barrier liquid limited splash test
4. Test for containment of radioactive particles.
5. Passing surface antistatic test
6. Single use
Applies to provide barriers for medical personnel to work in contact with potentially infectious patients'blood , body fluids, secretions, airborne particles and so on.
Implementation Standard: EN14126
Valid: 2 years.
Specification and size: (L- One piece pose)
|Size||Body Length||Chest||Sleeve length||Cuff||Leg opening|
Disposable, no recycling
If there are any damage or zipper and thread broken, no longer available for wearing.
Make sure packing is sealed before use.
How to wear on: Put on pant first, then wear top part, put on well hood, and pull on zipper at last.
How to undress: Pull down zipper as Picture 1 showed.
Upwards pulling hood and take it away from head as Picture 2 showed.
Then take off the sleeves as Picture 3 showed.
Rolling down from top to bottom as picture 4 showed.
Contamined side to be inside and throw to medical wasre storage as Picture 5 showed.